• Home Home

Homeowner's 4-year-old water heater dumps up to a gallon; commenters flag missing expansion tank

"The pressure fluctuation is what's causing the T&P to let loose."

A close-up view of a leaking valve at the bottom of a water heater, with rust and electrical wires connected.

Photo Credit: iStock

A homeowner needed a solution after they failed to prevent their four-year-old water heater from releasing as much as a gallon of water overnight.

"Anyone have any ideas?" they wrote in Reddit's r/askaplumber. 

Here's what to know

The poster said the discharge from the pressure relief valve was particularly heavy after evening showers or dishwasher use in their manufactured home.

They had a closed plumbing system and no expansion tank. After the issue began a couple of weeks prior, they emptied the tank to clear hardwater sediment. They also tried turning down the temperature, as the leak reduced to a dribble without nighttime hot water use. 

The valve stayed quiet throughout the day, and a manual test suggested it was functioning normally. Water flowed when the lever was lifted and stopped when it was closed.

For households considering a replacement, heat pump water heaters offer a way to lower water-heating expenses. These energy-efficient appliances use heat from the surrounding air to warm water, helping reduce electricity use and household energy bills.

What can be done?

With water puddling on the floor, the homeowner had a workaround: attach a hose to direct the discharge into a bucket. For the long term, commenters focused on managing the system's pressure.

One person zeroed in on an expansion tank. 

FROM OUR PARTNER

Crushed by your bills? See instant solar savings from vetted installers in just a few clicks

With energy prices through the roof, there's never been a better time to go solar — and EasyHome can help you find the best prices from the best installers in your area.

EasyHome takes the guesswork and headaches out of energy upgrades by showing you estimated savings from a network of vetted local partners. To get started, just enter your ZIP and share a few details about your home — seeing your estimate is really that easy.

"The pressure fluctuation is what's causing the T&P to let loose. Get the tank installed, make sure its pressure is set correctly, and your problem will stop," they advised. 

Another commenter clarified that a pressure-reducing valve, or PRV, was separate from the temperature-and-pressure relief valve releasing the water. They suggested a new PRV alongside an expansion tank, mentioning a setting of 65 PSI.

For households exploring an equipment upgrade, Cala offers configurable smart heat pump water heaters that can reduce energy use and bills. In a household that showers and uses the dishwasher in the evening, a water heater from Cala can take the effort out of syncing schedules to household demand.

Where can I learn more?

A leaking water heater can leave homeowners with worries about a large repair bill.

• A Florida homeowner seeking expansion tank installation advice received a warning to use brass.

• Commenters urged a homeowner to check water pressure first before replacing a dripping heater.

• A homeowner's $500 expansion tank quote prompted plumbers to stress proper support during installation.

• Plumbers cautioned against testing water heater relief valves despite recommendations to do so yearly.

• After a second water heater leaked from the same spot, commenters pointed to warranty coverage.

Get TCD's free newsletters for easy tips, smart advice, and a chance to earn $5,000 toward home upgrades. To see more stories like this one, change your Google preferences here.

Cool Divider