• Home Home

UK heat pump user turns on backup water heater, then spots repeated 3-kW power spikes

Hot water production initially worked without problems.

A heat pump with a Vaillant unistor tank.

Photo Credit: Reddit

A homeowner turned on a backup water heater to help their heat pump complete a hot water hygiene cycle, only to notice repeated electricity spikes and water staying hotter than intended.

Here's what to know

In a post on Reddit's r/UKHeatPumps community, the homeowner said they had what's a bit of an unusual setup that is starting to become more common: a heat pump designed for space heating with a Vaillant unistor tank for water heating as well. They asked whether the spikes stemmed from the controls, app settings, or wiring. Their newly installed heat pump supplied a hot water storage tank, with normal hot water production set to 116.6 degrees Fahrenheit (47 degrees Celsius).

Photo Credit: Reddit
Photo Credit: Reddit

Hot water production initially worked without problems. The homeowner had received instructions to keep the immersion heater's isolator off unless a heat pump malfunction made backup heating necessary.

Switching on the immersion heater allowed the anti-legionella cycle to reach its target temperature and finish. The homeowner took that step after reading that the heater should help raise the tank to the required temperature.

This homeowner's setup is a bit unusual in that their heat pump for space heating the home was also set up to be able to heat their water, something that's becoming more common like with Mitsubishi's Ecodan model. 

More common for water heating is a dedicated heat pump water heater, which can also do these tasks efficiently by pumping heat from outside the unit instead of generating heat of its own. This makes it cheaper and more energy-efficient to run, though as with all installations, it's important for installation to be conducted properly and ideally with at least a full year's warranty on the labor in case of issues like this to call the installer back to evaluate.

More background

The homeowner's inverter recorded repeated three-kilowatt spikes, even outside the programmed automatic settings. After the hygiene cycle, the immersion heater seemed to be maintaining a water temperature of about 131 degrees Fahrenheit (55 degrees Celsius).

The app, however, did not show those increases in electricity use.

FROM OUR PARTNER

Crushed by your bills? See instant solar savings from vetted installers in just a few clicks

With energy prices through the roof, there's never been a better time to go solar — and EasyHome can help you find the best prices from the best installers in your area.

EasyHome takes the guesswork and headaches out of energy upgrades by showing you estimated savings from a network of vetted local partners. To get started, just enter your ZIP and share a few details about your home — seeing your estimate is really that easy.

The immersion heater used the bottom isolator. The internet gateway used the middle plug, while the VWZ AI was connected to the upper switch.

The indoor controller already designated the auxiliary heater for domestic hot water (DHW).

What can be done?

The homeowner had compared electricity readings across two monitoring tools. They still wanted to know how to let the immersion heater support the hygiene cycle without apparently maintaining a higher water temperature afterward. Commenters maintained that it should stay switched off unless the main water heater broke down.

Most water heaters that use heat pump tech are more dedicated units resembling traditional hot water setups and thus less complicated than this homeowner's hybrid setup. Yet they still often come with advanced features. For instance, scheduling is central to Cala's configurable smart heat pump water heaters. Rather than treating every household's hot water routine alike, Cala offers custom operation that can align heating with the times when people need it.

Where can I learn more?

Other homeowners have run into hot water problems and questions about immersion heater costs and backup power. 

• A homeowner said a cold basement forced their heat pump water heater into electric-only mode.

• A U.K. renter questioned immersion heater bills, while owners warned against leaving it on continuously.

• A U.K. cabin builder pursued higher hot water efficiency, but a ducted tank won on cost and simplicity.

Get TCD's free newsletters for easy tips, smart advice, and a chance to earn $5,000 toward home upgrades. To see more stories like this one, change your Google preferences here.

Cool Divider